Monel 400 plate, alloy 400 sheet supplier in India -

Table of content

India's first ever supplier of alloy 400 sheet at lowest price

Monel 400 sheet price

Grade	Price in INR	Price in USD
Alloy 400	3200 per kg	$ 38.46

Stockist of ASTM B127 Werkstoff NR.2.4360 strip and coil use for pump and propeller shafts in Mumbai

What three purposes does alloy 400 plate serve?

We have ready stock of alloy 400 plate in thicknesses ranging from 0.5 to 20 mm at affordable prices.Order online to save money.

Monel 400 plate specification

Sheet	Plate	Coil
.018 to .140 inch	upto 3" thick	Gauges up 24" wide
Specification	Cutting	Uses
ASTM B127\| ASME SB127	laser, plasma, waterjet,	freshwater tank, hydrocarbon processing

HS code of Monel 400 sheet

Description	HS Code
Monel 400 Plate	75071200

Monel 400 plate weight calculator

Alloy:
形状：
Number of Pieces:
Enter size information:



Calculated Weight:

We provide nickel alloy 400 foil and shim sheet that is cut to length in any size in accordance with the needs of the client, explore more available types

Most frequent types of alloy 400 sheet

Monel 400 sheet

Alloy 400 strip

Werkstoff nr.2.4360 coil

Nickel alloy 400 foil

AMS 4544 shim sheet

Monel alloy 400 clad plate

Are odd sizes of monel alloy 400 clad plate hard to find?Don't worry, you can now order online at dealer prices, see properties of AMS 4544 hot and cold rolled plate

2.4360 plate mechanical properties

Element	Tensile Strength	Melting Point	Yield Strength (0.2%Offset)	Density	Elongation
Monel 400	Psi – 80,000 , MPa – 550	1350 °C (2460 °F)	Psi – 35,000 , MPa – 240	8.8 g/cm3	40 %

AMS 4544 coil chemical properties

Grade	S	Mn	Ni	Si	C	Cu	Fe
Monel 400	0.024 max	2.00 max	63.00 min	0.50 max	0.30 max	28.00 – 34.00	2.50 max

Werkstoff NR.2.4360 sheet equivalent

STANDARD	UNS	AFNOR	WERKSTOFF NR.	EN	JIS	GOST	BS
Monel 400	N04400	NU-30M	2.4360	NiCu30Fe	NW 4400	МНЖМц 28-2,5-1,5	NA 13

Thermal properties of monel 400 coil

Monel 400 Temperature		Mean Linear Expansionb		Thermal Conductivitya		Specific Heata		Electrical Resistivitya,c
°F	°C	in/in/°F x 10-6	mm/m•°C	Btu-in/h/ft2/°F	W/m•°C	Btu/lb/°F	J/kg•°C	ohm-circ mil/ft	mL•m
-320	-200	-	-	-	-	-	-	205	.360
-300	-180	6.1	11.1	113	16.5	0.050	223	-	-
-200	-130	6.4	11.4	130	18.2	0.078	320	-	-
-100	-70	6.7	12.1	139	19.8	0.088	378	-	-
70	21	-	-	151	22.0	0.102	427	307	0.511
200	100	7.7	14.2	167	24.0	0.105	445	322	0.537
400	200	8.6	15.2	193	26.9	0.110	459	337	0.559
600	300	8.8	15.7	215	30.1	0.114	470	346	0.574
800	400	8.9	16.1	238	33.4	-	-	355	0.587
1000	500	9.1	16.3	264	36.5	-	-	367	0.603
1200	600	9.3	16.6	287	39.4	-	-	379	0.620
1400	700	9.6	17.0	311	42.4	-	-	391	0.639
1600	800	9.8	17.4	335d	45.5d	-	-	403	0.658
1800	900	10.0d	17.7	360d	48.8d	-	-	415	0.675
2000	1000	10.3d	18.1d	-	-	-	-	427	0.692

Shear strength of nickel alloy 400 plate

Monel 400 Temper	Hardness, Rb	Shear Strength, ksi	Thickness, in.	Tensile Strength, ksi	Ratio Shear Strength/ Tensile Strength
Cold-Rolled, Annealed	60	49.50	0.029	76.8	0.65
Hot-Rolled, Annealed	65	48.75	0.042	73.0	0.67

Monel 400 sheet hardness

Monel 400 Temper	Rockwell B Hardness
Monel 400 Temper	Sheet	Strip
Annealeda	73 max.	68 max.
Hard	93 min.	93-98
Deep-Drawing and Spinning Quality	76 max.	76 max.
Quarter-Hard	73-83	73-83
Skin-Hard	-	68-73
Three-Quarter-Hard	-	89-94
Half-Hard	82-90	82-90
Spring	-	98 min.

Bearing strength of alloy 400 sheet

Temper	Monel 400 Bearing Strength		Tensile Properties			Ratio, Bearing Strength/
Temper	Yield Strengtha, ksi	Ultimate Strengthb, ksi	Tensile Strength, ksi	Yield Strength (0.2% Offset), ksi	Elongation, %	Yield Strength	Ultimate Strength
Half-Hard	98.1	166.0	75.8	56.2	32.0	1.75	2.19
Annealed	58.0	145.0	70.0	27.2	42.5	2.13	2.07
Full-Hard	162.0	211.5	117.8	110.0	5.0	1.47	1.79

Fatigue strength of Monel 400 foil

Temper	Tensile Strength, ksi	Fatigue Strength (108 cycles), ksi	Ratio, Fatigue Strength/ Tensile Strength
Quarter-Hard	76.5	24.5	0.32
Annealed	74.7	21.0	0.28
Full-Hard	126.0	39.0	0.31
Half-Hard	84.2	28.5	0.34
Full-Hard, Stress-Equalized (525°F/21 hr)	133.0	41.0	0.31

Sizes of 2.4360 plate

SIZE in Inch	SIZE in MM
.134"	3.40mm
.125"	3.18mm
.187"	4.75mm
.156"	3.96mm
.312"	7.92mm
2.500"	63.5mm
.250"	6.35mm
.500"	12.7mm
.375"	9.53mm
.625"	15.9mm
.875"	22.2mm
.750"	19.1mm
1"	25.4mm
1.250"	31.8mm
1.125"	28.6mm
1.750"	44.5mm
1.500"	38.1mm
2"	50.8mm
3"	76.2mm

Nickel alloy 400 plate weight chart

Weight per Unit Area
lbs/in²	Thickness	kg/m²
0.08 lbs/in²	1/4 inches	56.245568 kg/m²
0.06000 lbs/in²	3/16 inches	42.184176 kg/m²
0.161 lbs/in²	1/2 inches	113.1942056 kg/m²
0.121 lbs/in²	3/8 inches	85.0714216 kg/m²
0.235 lbs/in²	3/4 inches	165.221356 kg/m²
0.196 lbs/in²	5/8 inches	137.8016416 kg/m²
0.313 lbs/in²	1 inches	220.0607848 kg/m²
0.274 lbs/in²	7/8 inches	192.6410704 kg/m²
0.47 lbs/in²	1 1/2 inches	330.442712 kg/m²
0.784 lbs/in²	2 1/2 inches	551.2065664 kg/m²
0.391 lbs/in²	1 1/4 inches	274.9002136 kg/m²
0.705 lbs/in²	2 1/4 inches	495.664068 kg/m²
0.627 lbs/in²	2 inches	440.8246392 kg/m²
0.862 lbs/in²	2 3/4 inches	606.0459952 kg/m²
0.549 lbs/in²	1 3/4 inches	385.9852104 kg/m²
0.941 lbs/in²	3 inches	661.5884936 kg/m²

Monel 400 plate welding procedure

Thickness chart of AMS 4544 hot rolled plate

1/4"	3/4"	3/16"	1/2"	3/8"	5/8"
6.3mm	19mm	4.8mm	12.7mm	9.5mm	15.9mm
31.8mm	63.5mm	25.4mm	44.5mm	38.1mm	50.8mm
1 1/4"	2 1/2"	1"	1 3/4"	1 1/2"	2"

Monel alloy 400 cold rolled plate tolerance on thickness

Widthw(mm)	8.0	4.5	2.5	6.0	12.5	10.0	20.0	16.0	30	25.0
	Tolerance over and under nominal thicknesst(mm)
2700< w <3000	1.0	0.80		0.90	1.0	1.0	1.3	1.1	1.8	1.4
1200< w <1500	0.35	0.25	0.20	0.30	0.80	0.38	0.90	0.80	1.4	1.0
w < 1200	0.32	0.23	0.20	0.30	0.80	0.35	0.80	0.80	1.4	1.0
1500< w <1800	0.38	0.28	0.20	0.32	0.80	0.40	0.90	0.80	1.5	1.1
2100< w <2400	0.80	0.80		0.80	0.80	0.80	1.0	0.90	1.5	1.1
1800< w <2100	0.40	0.30	0.20	0.36	0.80	0.45	0.90	0.80	1.5	1.1
2400< w <2700	0.80	0.80		0.80	0.90	0.80	1.1	1.0	1.7	1.3

Nickel 400 strip dimensions

KG P/M2	Dimension (mm)
6.3	0.712193048
4.5	0.5 乘以 1000 乘以 2000
8.1	0.9 乘以 1219 乘以 3048
14.4	1.6 乘以 1200 乘以 3048
10.8	1.234 x 1234 x 3456
27.0	请随意重写以下英文内容，仅返回重写内容：1800
18.0	2000 x 1219 x 3048
28.6	3.18 X VARIOUS ANN

Tolerance on width of BS 3072NA1 sheet

	Tolerance (mm)
	Trimmed edge		Mill edge
Nominal width (mm)	Plus	Minus	Plus	Minus
1200 < w<1500	5	0	20	0
w < 1200	3	0	20	0
w > 1500	5	0	20	0

Authorised dealer and distributors of alloy 400 coil

AMS 4544 foil standards

Specifications:	AMS 4544, ASTM B127
UNS:	N04400
International Specifications:	BS 3072NA1, DIN 17750, BS 3073NA13, QQ-N-281

Tolerance on length of DIN 2.4360 sheet

	Tolerance(mm)
Nominal length (mm)	Plus	Minus
2,000<L < 8,000	0.005 times L	0
L < 2,000	10	0
L > 8,000	40	0

Monel 400 vs Inconel 600

Description	Monel 400	Inconel 600
Matrix	Nickel Copper	Nickel Chromium Iron
Density	8.80 g/cm³	8.47 g/cm³
Temperature	Room Temperature	High Temperature
Corrosion Resistance	Seawater Corrosion	High-temp Corrosion

Gauge chart of alloy 400 plate

Gauge (in)	Width (in)
12–24	max.60
10–24	max.72*
11–24	max.60
18–28	max.48
13–29	max.48

FAQ

Is it simple to machine alloy 400 plate?

have poor machinability

What is thickness range of monel 400 sheet ?

0.5 mm to 50.8 mm

What is the melting point of nickel alloy 400 plate ?

1300-1350°C (2372-2462°F)

Can monel 400 sheet be hot-formed or cold-formed ?

using standard techniques it is easily cold-formed or hot-formed

Can monel alloy 400 plates suitable to used in marine environments?

Yes, Monel 400 plates are highly resistant to corrosion in marine environments