Inconel round bar

We are highest-quality Inconel rod and flat bar manufacturer in India

Trusted supplier of ASTM B166 Inconel hex bar and square bar in Mumbai, Why spend extra if you can get the exact size ?

Stockist of ASME SB166 inconel bar stock in size range from 3mm to 800 mm at a reasonable cost , know more about other specification

• The inconel material is melted in an electric arc furnace, which ensures homogeneity and proper alloying of the elements.
• The molten alloy is then cast into the desired shape followed by heat treatment procedures like annealing.This helps to relieve mechanical stress and enhance the mechanical properties.
• Inconel rod production process might also involve hot working like extrusion or rolling.This is followed by cold drawing which improves the tensile strength and dimensional accuracy of the rods.
• The rods are finally cut and given the desired finish as per the specific application requirements.

To fulfil your project's requirements, we are here to help you with any inconel cold drawn bar and round stock requirements , check various available sizes and shape here

Get complete technical information of inconel rectangular and bright bar including equivalent, chemical and mechanical composition etc

• Inconel Round Bar Manufacturer In India produces hot rolled bars by heating a large billet to a high temperature and then passing it through rollers.Cold drawn bars are produced by pulling annealed round bars through a series of dies at room temperature.
• Inconel alloy cold drawn bars have a smoother surface finish than hot rolled ones.
• Cold drawn bars have a finer and uniform grain structure due to controlled deformation at lower temperature conditions.
• Cold drawn inconel square bars have tighter dimensional tolerance and exhibit improved mechanical properties.

• Eddy Current test
• Chemical examination
• Buckling & Crushing test
• Pitting Corrosion Test
• Radiographic Test
• Positive material recognition
• Mechanical examining

• Machining
• SAW Cutting
• Polishing

• Specialty Chemicals
• Condensers
• Sea Water Equipment
• Pharmaceuticals
• Chemical Equipment
• Heat Exchangers
• Pharmaceutical Equipment
• Gas Processing

• 100% Radiography Test Report etc
• Raw Materials Certificate
• Third Party Inspection Report
• EN 10204/3.1B,

Alloy:	Nickel 625Nickel 200Nickel 400Nickel R-405Nickel K-500Nickel 600Nickel 800HNickel 800ATNickel 825Nickel 330Nickel 20Nickel C-276Nickel 2545MD------------------------
形状：	HexagonalOctagonalSquareRoundFlat------------------------
Number of Pieces:
Enter size information:
			mmftydincmm
			mmftydincmm
			mmftydincmm
Calculated Weight:
lbsKgstons

In nuclear power facilities, welding between more expensive Inconel and less expensive stainless steel works well.Welding these materials together is difficult due to their differences in chemical composition, melting point, mechanical, thermal, and other qualities.

Welding Inconel to Inconel and to other dissimilar metals, such as stainless steel, is accomplished with Inconel Filler Metal 625 rod.Weldments made of inconel have a high strength and a strong resistance to oxidation and corrosion

There are different inconel bar grades like 600 & 700 series and N06230.

• Inconel 600 Round Bar
• Inconel 601 Round Bar
• Inconel 625 Round Bar
• Incoloy 800 Round Bar
• Incoloy 825 Round Bar

In order to determine the weight of a round bar, the following techniques can be used:

Method 1:Weight = OD2 x 0.00617

抱歉，您未提供原始内容。请提供需要
OD : Outer diameter (unit: mm)

Method 2:Weight = R2 / 40.5

抱歉，您未提供原始内容。请提供需要
OD: Outer diameter (unit: mm)
R : Radius (R = OD/2) (unit: mm)

Method 3:Weight = OD2/ 162

抱歉，您未提供原始内容。请提供需要
OD: Outer diameter (unit: mm)

Method 4:Weight = R2 x 0.02466

抱歉，您未提供原始内容。请提供需要
OD: Outer diameter (unit: mm)
R: Radius (R = OD/2) (unit: mm)

Method 5:Weight = 0.0007854 x OD x OD x 7.85

抱歉，您未提供原始内容。请提供需要
OD : Outer diameter (unit: mm)