The Inconel fastener size can range between M02 to M160.The length of the fasteners is within 3-200 mm with corresponding thread pitches.
Inconel products are quite rare and the production process is quite complex too.Inconel Shoulder Bolts are around five times more expensive than standard ss bolts.However, the price of Inconel Carriage Bolts price per kg can vary with suppliers depending on their internal costings and market conditions.The price can also fluctuate with customization required, quantity ordered, delivery location and any other additional requirements.If you wish to know the exact price of the Inconel Alloy Eye Bolts, contact a reputed supplier like Regent Steel & Engineering Co.They offer high quality inconel products at competitive rates and adhere to the industry standards.
Inconel bolts
ASTM F2281 Inconel hex bolts
Inconel rivets
By maintaining Inconel rivets, you can ensure their durability and optimal performance.Some maintenance tips are:
Hot Forged | CNC Machined | MTC |
---|---|---|
M36/1-1/2 " Dia, upto 1100 mm length | M100/4" Dia, upto 1500 mm length | EN 10204 3.1/3.2 |
Specification | Thread | Application |
ASTM F2281 | ASME SF2281 | BSW, METRIC, UNF, UNC, BSF, custom | Aerospace and gas turbine |
Inconel alloy shoulder bolt
ASME SF2281 inconel dowel pins
Inconel nuts and bolts
Inconel | Element (% by mass) | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Co | Mo | Fe | Cr | Nb | Ni | Ti | Mn | Al | Cu | Si | S | C | B | P | ||
625 | 1.0 | 8.0-10.0 | 5.0 | 20.0-23.0 | 3.15-4.15 | 58.0 | 0.4 | 0.5 | 0.4 | 0.5 | 0.015 | 0.1 | 0.015 | |||
600 | 6.0-10.0 | 14.0-17.0 | 72.0 | 1.0 | 0.5 | 0.5 | 0.015 | 0.15 | ||||||||
718 | 1.0 | 2.8-3.3 | balance | 17.0-21.0 | 4.75-5.5 | 50.0-55.0 | 0.3 | 0.35 | 0.65-1.15 | 0.2-0.8 | 0.35 | 0.015 | 0.08 | 0.006 | 0.015 | |
617 | 10.0-15.0 | 8.0-10.0 | 3.0 | 20.0-24.0 | 44.2-56.0 | 0.6 | 0.5 | 0.8-1.5 | 0.5 | 0.5 | 0.015 | 0.15 | 0.006 | 0.015 | ||
X-750 | 1.0 | 5.0-9.0 | 14.0-17.0 | 0.7-1.2 | 70.0 | 2.25-2.75 | 1.0 | 0.4-1.0 | 0.5 | 0.5 | 0.01 | 0.08 |
Nickel Alloys | Werkstoff No. | UNS no. | Density (8.8 g/cm3) | Tradename |
---|---|---|---|---|
Alloy 718 | 2.4668 | N07718 | 8.19 | Inconel 718 |
Alloy 601 | 2.4851 | N06601 | 8.2 | Inconel 601 |
Alloy 625 | 2.4856 | N06625 | 8.44 | Inconel 625 |
Alloy 600 | 2.4816 | N06600 | 8.42 | Inconel 600 |
Inconel 625 | Inconel 600 | Inconel 718 | Inconel 601 | |
---|---|---|---|---|
Yield strength – Mpa | 345min. | 240min. | 550 min. | 300min. |
Density | 8.4 g/cm³ | 8.4 g/cm³ | 8.2 g/cm³ | 8.1g/cm³ |
Tensile strength – Mpa | 760min. | 550min. | 965min | 650min. |
Brinell hardness (HB) | ≤220 | ≤195 | ≤363 | ≤220 |
Elongation % | 30 min. | 30min. | 30 min. | 30 min. |
Melting Range,℃ | 1290-1350℃ | 1370-1425 ℃ | 1260-1340 ℃ | 1320-1370℃ |
Inconel dowel pins chemical composition can be hazardous.If it gets inhaled in the form of dust particles or fumes during the welding or melting process, can cause respiratory issues.So proper measures should be taken like wearing PPE to prevent metal fume fever.
Flange Size |
B16.5 Class 150 FF/ Full Face Gaskets | B16.5 Class 150 RF/ Ring Gaskets | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Torque / Round (ft-lbs) | Stud Bolts Tighten Sequence | Torque / Round (ft-lbs) | Stud Bolts Tighten Sequence | |||||||
2nd | 1st | Final | Bolt Size | Dwg*/No. | 2nd | 1st | Final | Bolt Size | Dwg/No. | |
1/2 | 40 | 20 | 60 | 1/2 | 4-bolt | 20 | 10 | 30 | 1/2 | 4-bolt |
3/4 | 40 | 20 | 60 | 1/2 | 4-bolt | 27 | 13 | 40 | 1/2 | 4-bolt |
1 | 40 | 20 | 60 | 1/2 | 4-bolt | 30 | 15 | 50 | 1/2 | 4-bolt |
1-1/4 | 40 | 20 | 60 | 1/2 | 4-bolt | 40 | 20 | 60 | 1/2 | 4-bolt |
1-1/2 | 40 | 20 | 60 | 1/2 | 4-bolt | 40 | 20 | 60 | 1/2 | 4-bolt |
2 | 80 | 40 | 120 | 5/8 | 4-bolt | 80 | 40 | 120 | 5/8 | 4-bolt |
2-1/2 | 80 | 40 | 120 | 5/8 | 4-bolt | 80 | 40 | 120 | 5/8 | 4-bolt |
3 | 80 | 40 | 120 | 5/8 | 4-bolt | 80 | 40 | 120 | 5/8 | 4-bolt |
3-1/2 | 80 | 40 | 120 | 5/8 | 8-bolt | 80 | 40 | 120 | 5/8 | 8-bolt |
4 | 80 | 40 | 120 | 5/8 | 8-bolt | 80 | 40 | 120 | 5/8 | 8-bolt |
5 | 120 | 60 | 200 | 3/4 | 8-bolt | 120 | 60 | 200 | 3/4 | 8-bolt |
6 | 120 | 60 | 200 | 3/4 | 8-bolt | 120 | 60 | 200 | 3/4 | 8-bolt |
8 | 120 | 60 | 200 | 3/4 | 8-bolt | 120 | 60 | 200 | 3/4 | 8-bolt |
10 | 190 | 95 | 320 | 7/8 | 12-bolt | 190 | 95 | 320 | 7/8 | 12-bolt |
12 | 190 | 95 | 320 | 7/8 | 12-bolt | 190 | 95 | 320 | 7/8 | 12-bolt |
14 | 294 | 147 | 490 | 1 | 12-bolt | 294 | 147 | 490 | 1 | 12-bolt |
16 | 294 | 147 | 490 | 1 | 16-bolt | 294 | 147 | 490 | 1 | 16-bolt |
18 | 426 | 213 | 710 | 1-1/8 | 16-bolt | 426 | 213 | 710 | 1-1/8 | 16-bolt |
20 | 426 | 213 | 710 | 1-1/8 | 20-bolt | 426 | 213 | 710 | 1-1/8 | 20-bolt |
24 | 600 | 300 | 1,000 | 1-1/4 | 20-bolt | 600 | 300 | 1,000 | 1-1/4 | 20-bolt |
Stud bolt size | Length of Stud Bolts | ||||||
---|---|---|---|---|---|---|---|
NPS | Number of Bolts | The diameter of Bolt Circle | Outside Diameter of Flange | The diameter of Bolt Holes | Diameter of Bolts | Ring Joint | Raised Face 0.06 in |
1/2 | 4 | 2 3/8 | 3 1/2 | 5/8 | 1/2 | – | 2 1/4 |
24 | 20 | 29 1/2 | 32 | 1 1/4 | 1 1/4 | 7 1/4 | 6 3/4 |
1 1/4 | 4 | 3 1/2 | 4 5/8 | 5/8 | 1/2 | 3 1/4 | 2 3/4 |
2 | 4 | 4 3/4 | 6 | 3/4 | 5/8 | 3 3/4 | 3 1/4 |
1 | 4 | 3 1/8 | 4 1/4 | 5/8 | 1/2 | 3 | 2 1/2 |
2 1/2 | 4 | 5 1/2 | 7 | 3/4 | 5/8 | 4 | 3 1/2 |
3 1/2 | 8 | 7 | 8 1/2 | 3/4 | 5/8 | 4 | 3 1/2 |
3 | 4 | 6 | 7 1/2 | 3/4 | 5/8 | 4 | 3 1/2 |
4 | 8 | 7 1/2 | 9 | 3/4 | 5/8 | 4 | 3 1/2 |
6 | 8 | 9 1/2 | 11 | 7/8 | 3/4 | 4 1/2 | 4 |
5 | 8 | 8 1/2 | 10 | 7/8 | 3/4 | 4 1/4 | 3 3/4 |
8 | 8 | 11 3/4 | 13 1/2 | 7/8 | 3/4 | 4 3/4 | 4 1/4 |
12 | 12 | 17 | 19 | 1 | 7/8 | 5 1/4 | 4 3/4 |
10 | 12 | 14 3/4 | 16 | 1 | 7/8 | 5 | 4 1/2 |
14 | 12 | 18 3/4 | 21 | 1 1/8 | 1 | 5 3/4 | 5 1/4 |
1 1/2 | 4 | 3 7/8 | 5 | 5/8 | 1/2 | 3 1/4 | 2 3/4 |
18 | 16 | 22 3/4 | 25 | 1 1/4 | 1 1/8 | 6 1/4 | 5 3/4 |
16 | 16 | 21 1/4 | 23 1/2 | 1 1/8 | 1 | 5 3/4 | 5 1/4 |
20 | 20 | 25 | 27 1/2 | 1 1/4 | 1 1/8 | 6 3/4 | 6 1/4 |
Weight (lbs.) Per 100 Pieces | Sizes | B | A | C |
---|---|---|---|---|
Inside Diameter | Thickness | Outside Diameter | ||
8 | 5/8 | 13/4 | 11/16 | 0.134 |
4 | 1/2 | 13/8 | 9/16 | 0.109 |
11 | 3/4 | 2 | 13/16 | 0.148 |
19 | 1 | 21/2 | 11/16 | 0.165 |
15 | 7/8 | 21/4 | 15/16 | 0.165 |
26 | 11/4 | 3 | 13/8 | 0.165 |
22 | 11/8 | 23/4 | 11/4 | 0.165 |
33 | 13/8 | 31/4 | 11/2 | 0.180 |
43 | 15/8 | 33/4 | 13/4 | 0.180 |
38 | 11/2 | 31/2 | 15/8 | 0.180 |
50 | 13/4 | 4 | 17/8 | 0.180 |
63 | 2 | 41/2 | 21/8 | 0.180 |
57 | 17/8 | 41/4 | 2 | 0.180 |
83 | 21/4 | 43/4 | 23/8 | 0.220 |
110 | 23/4 | 51/4 | 27/8 | 0.259 |
96 | 21/2 | 5 | 25/8 | 0.238 |
130 | 3 | 51/2 | 31/8 | 0.284 |
APPROXIMATE WEIGHT IN KGS | |||||||||
---|---|---|---|---|---|---|---|---|---|
LENGTH | D I A M E T E R | ||||||||
M 10 | M 6 | M 5 | M 8 | M 20 | M 16 | M 14 | M 18 | M 22 | |
16 mm | 3.211 | 0.743 | 0.448 | 1.590 | |||||
25 mm | 3.660 | 0.897 | 0.660 | 1.871 | 8.170 | ||||
20 mm | 3.411 | 0.812 | 0.598 | 1.711 | |||||
35 mm | 4.223 | 1.120 | 0.804 | 2.271 | 19.608 | 11.416 | 10.000 | 16.026 | |
30 mm | 3.912 | 1.010 | 0.737 | 2.070 | 18.657 | 10.707 | 9.690 | ||
45 mm | 4.840 | 1.340 | 0.958 | 2.671 | 21.739 | 12.821 | 10.504 | 17.241 | |
40 mm | 4.533 | 1.230 | 0.881 | 2.470 | 20.747 | 12.107 | 10.288 | 16.667 | |
50 mm | 5.155 | 1.450 | 1.030 | 2.870 | 22.727 | 13.624 | 11.261 | 17.857 | 28.409 |
60 mm | 5.774 | 1.670 | 3.270 | 25.126 | 15.244 | 12.255 | 20.000 | 32.051 | |
55 mm | 5.464 | 1.560 | 3.071 | 23.810 | 14.409 | 11.628 | 18.868 | 30.120 | |
65 mm | 6.083 | 1.781 | 3.472 | 26.455 | 16.026 | 12.626 | 21.008 | 34.014 | |
75 mm | 6.702 | 2.000 | 3.873 | 29.070 | 17.606 | 13.228 | 23.256 | 39.063 | |
70 mm | 6.394 | 1.890 | 3.671 | 27.778 | 16.835 | 12.987 | 22.124 | 35.461 | |
80 mm | 7.013 | 2.111 | 4.072 | 30.303 | 18.248 | 13.889 | 24.510 | 40.000 | |
100 mm | 8.251 | 4.873 | 35.714 | 21.459 | 16.340 | 27.778 | 46.296 | ||
90 mm | 7.634 | 4.472 | 33.113 | 19.841 | 14.925 | 26.042 | 41.667 | ||
110 mm | 8.881 | 38.168 | 23.041 | 17.730 | 31.250 | 47.170 | |||
130 mm | 10.101 | 43.478 | 26.316 | 20.000 | 34.722 | 52.632 | |||
120 mm | 9.506 | 40.984 | 24.631 | 18.797 | 32.895 | 50.000 | |||
140 mm | 10.707 | 46.296 | 27.933 | 20.833 | 35.461 | 55.556 | |||
160 mm | 11.905 | 50.505 | 31.056 | 24.272 | 40.984 | 61.728 | |||
150 mm | 11.312 | 48.544 | 29.412 | 22.222 | 37.594 | 58.824 | |||
180 mm | 13.123 | 55.556 | 34.247 | 26.882 | 67.568 | ||||
170 mm | 12.500 | 53.191 | 32.680 | 64.935 | |||||
190 mm | 13.736 | 58.140 | 35.971 | 70.423 | |||||
220 mm | 15.528 | 65.789 | 40.650 | 79.365 | |||||
200 mm | 14.327 | 60.976 | 37.594 | 29.586 | 49.020 | 73.529 | |||
240 mm | 16.722 | 71.429 | 43.860 | 84.746 | |||||
260 mm | 17.921 | 76.923 | 47.170 | 90.909 | |||||
250 mm | 17.301 | 74.627 | 45.455 | 87.719 | |||||
280 mm | 19.157 | 81.967 | 50.505 | 98.039 | |||||
320 mm | 92.593 | 56.818 | |||||||
300 mm | 20.325 | 87.719 | 53.763 | 104.167 | |||||
360 mm | 104.167 | 63.291 | |||||||
340 mm | 98.039 | 60.241 | |||||||
380 mm | 108.696 | 66.667 | |||||||
400 mm | 113.636 | 69.444 |
Size | Heavy Hex Jam | Heavy Hex | Finished Hex | Heavy Square | Finished Jam | Square |
---|---|---|---|---|---|---|
5/8″ | 6.96 | 11.9 | 7.33 | 14.3 | 4.93 | 10.8 |
1/2″ | 4.00 | 6.54 | 3.75 | 7.87 | 2.62 | 5.78 |
3/4″ | 11.0 | 19.3 | 11.9 | 23.5 | 7.70 | 15.4 |
1″ | 23.5 | 42.5 | 28.3 | 51.5 | 17.6 | 36.3 |
7/8″ | 16.7 | 29.7 | 19.0 | 36.2 | 12.0 | 24.5 |
11/4″ | 45.8 | 78.6 | 54.3 | 95.5 | 36.1 | 70.6 |
11/8″ | 32.4 | 59.2 | 40.3 | 72.4 | 24.7 | 52.5 |
13/8″ | 59.3 | 102 | 73.0 | 125.0 | 47.9 | 94.5 |
15/8″ | 91.6 | 162 | ||||
11/2″ | 74.8 | 131 | 94.3 | 161 | 60.9 | 122 |
13/4″ | 114 | 204 | 151 | 100 | ||
2″ | 165 | 299 | 224 | 140 | ||
17/8″ | 134 | 241 | ||||
21/4″ | 227 | 419 | ||||
4″ | 1200 | 2180 | ||||
23/4″ | 429 | 738 | ||||
21/2″ | 332 | 564 | ||||
3″ | 545 | 950 | ||||
31/2″ | 851 | 1526 | ||||
31/4″ | 651 | 1194 | ||||
33/4″ | 1005 | 1812 |
Length | Diameter |
---|---|
2" – 2 3/4" | 5/8" |
1 1/2" – 1 3/4" | 1/2" |
4" – 4 1/2" | 7/8" |
3" – 3 3/4" | 3/4" |
5" – 5 1/2" | 1 1/8" |
8" | |
5" – 5 1/2" | 1" |
7" – 7 1/2" | 1 1/4" |