Regent Steel & Engineering Co.is one of the most renowned suppliers of inconel 625 products in India.They are equipped with a huge & technically advanced facility along with experienced professionals to produce high quality inconel 625 pipe fittings.
We offer full customization on these fittings to meet your specific application requirements.Whether you want cut-to-length inconel alloy 625 elbow or additional surface treatments, we are there to assist you.Contact us today and let us know your specific requirements for alloy 625 tee and other fittings.
We are an expert alloy 625 fittings manufacturer in India as per ANSI/ASME B16.9, review the testing procedure in detail
- Chemical composition analysis on inconel 625 fittings ensures that the specific alloy composition meets the recommended industry standards.
- Mill test reports offer detailed information on the manufacturing process, heat treatment and mechanical properties of the fittings.
- Mechanical testings like tensile tests are specifically designed to determine the given mechanical properties of DIN 2.4856 concentric reducer.
- Non-destructive tests like ultrasonic or dye penetration help to detect surface or subsurface defects or other underlying issues in the fittings.
- PMI tests help with detecting the composition and identity of the alloy.
- Pressure testing assesses the integrity of the ASTM B366 UNS N06625 eccentric reducer under a given amount of pressure.
- A dimensional inspection ensures that the nickel alloy 625 stub end meets the specific requirements for sizes, tolerances and configurations.
As a supplier, provide inconel alloy 625 elbow, reducer, and tee that have been approved and finished in compliance with ASTM B366.check experts tips
Alloy 625 fittings
Inconel 625 buttweld fitting
Inconel alloy 625 elbow
Suppliers and experts of inconel 625 buttweld fittings recommend the following for use:
- You should always analyze the operating condition of your application, including temperature and pressure, to ensure inconel 625 products are the right solution.
- Have the buttweld nickel 625 pipe bends installed by an experienced professional so as to ensure a proper fit.
- Adhere to the industry standards and codes for the design, fabrication and installation of the buttweld fittings
- Employ proper welding techniques and filler material.
- Conduct a thorough inspection post installation to maintain the weld integrity.
For maintaining the buttweld EN 2.4856 fittings, you should conduct regular inspections and clean the surface to remove surface contaminations.
Also, perform routine exams like pressure tests to check the fittings for any leakages.Make sure to always use the UNS 6625 pipe cross within the right temperature range.
As oldest stockist, we can quickly provide inconel 625 buttweld fitting in Mumbai in a variety of sizes including 1/2′′ to 10′′ (seamless) and 1/2′′ to 48′′ (welded).see other specification
| Standard | Welded Size | Seamless Size |
|---|---|---|
| ASME/ANSI B16.9, ASME B16.28 | 1/2" to 48" | 1/2" to 10" |
| Inconel 625 Elbow Radius | Type | Schedule |
| 1D to 10D or custom | Elbow, tee, reducer, cap stub end | Sch 10 to Sch 140 |
| Process | Surface Treatment | Inconel 625 Fittings Specification |
| Seamless, welded, fabricated | Sand rolling, Sand blasting | ASTM B366 | ASME SB366 |
For excellent and adaptable ASME SB366 UNS N06625 seamless and welded fittings for high temperature applications, you should request a quote right away, view several type options
UNS N06625 tee
- Seamless
- Welded
- Fabricated
DIN 2.4856 reducer
- Seamless: 1/2 to 10 inch
- Welded: 1/2 to 48 inch
- ASTM B366| ASME SB366
Nickel alloy 625 stub end
- SCH10 to XXS
- 1D to 10D
- Cast, press, push, forge
Are you having problems finding trustworthy distributors of DIN 2.4856 stub ends and caps who can make delivery right away?come here and check nickel alloy 625 equivalent, mechanical, chemical composition
| Inconel 625 | Ni | Mn | Cr | Mo | Ti | Nb+Ta | Fe | C | Si | Ph | S | Co | Al | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max | 0.10 | - | 5 | 0.40 | 10 | 23 | 4.15 | 0.50 | 0.50 | 0.015 | 0.40 | 0.015 | 1.0 | |
| Min | - | Bal | - | - | 8 | 20 | 3.15 | - | - | - | - | - | - |
| Inconel 625 | Tensile Strength | Inconel 625 Fittings Hardness | Reduction of area | 0.2% Proof Stress | Elongation |
|---|---|---|---|---|---|
| MPA | HRB | % | MPA | % | |
| Min | Min | Min | Min | Min | |
| 827 | 145 | 40 | 414 | 30 |
| STANDARD | GOST | JIS | WERKSTOFF NR. | BS | UNS | AFNOR | EN |
|---|---|---|---|---|---|---|---|
| Inconel 625 | ХН75МБТЮ | NCF 625 | 2.4856 | NA 21 | N06625 | NC22DNB4MNiCr22Mo9Nb | NiCr23Fe |
The price of inconel 625 reducing tee varies with the supplier due to their internal pricing strategies and market conditions.However, the price of the fittings also depends on size & dimension, custom requirements, quantity ordered and delivery locations.
If getting the best quality fittings made of inconel 625 material at the most competitive rate is your goal, contact Regent Steel & Engineering Co.
The inconel 625 seamless fittings show exceptional corrosion resistance in a wide range of environments.This is due to their high nickel, chromium and molybdenum content.The material is quite resistant to acidic and alkaline environments.
The alloy 625 equal tee can also withstand pitting, crevice corrosion and chloride ion related stress corrosion cracking.The material can also retain its corrosion resistance properties in elevated temperature conditions.
The alloy 625 fittings have good welding properties and can be welded easily.Common welding procedures like GTAW or GMAW can be employed for welding these fittings.
However, selecting the right welding technique depends on the specific application, welding conditions and the desired results.
| NP | OD | Center to End | |||
|---|---|---|---|---|---|
| NP 1X2X3 | OD2 | OD1 | M | C | |
| 3/4×3/4×3/4 | 26.67 | 26.67 | 28.40 | 28.40 | |
| 1/2X1/2X1/2 | 21.34 | 21.34 | 25.40 | 25.40 | |
| 3/4×3/4×1/2 | 21.34 | 26.67 | 28.45 | 28.45 | |
| 1x1x3/4 | 26.67 | 33.53 | 38.10 | 38.10 | |
| 1x1x1 | 33.53 | 33.53 | 38.10 | 38.10 | |
| 1x1x1/2 | 21.34 | 33.53 | 38.10 | 38.10 | |
| 11/4×11/4×1 | 33.53 | 42.16 | 47.76 | 47.76 | |
| 11/4×11/4×1/4 | 42.16 | 42.16 | 47.76 | 47.76 | |
| 11/4×11/4×3/4 | 26.67 | 42.16 | 47.76 | 47.76 | |
| 11/2×11/2×11/2 | 48.26 | 48.26 | 57.15 | 57.15 | |
| 11/4×11/4×1/2 | 21.34 | 42.16 | 47.76 | 47.76 | |
| 11/2×11/2×11/4 | 42.16 | 48.26 | 57.15 | 57.15 | |
| 11/2×11/2×3/4 | 26.67 | 48.26 | 57.15 | 57.15 | |
| 11/2×11/2×1 | 33.53 | 48.26 | 57.15 | 57.15 | |
| 11/2×11/2×1/2 | 21.34 | 48.26 | 57.15 | 57.15 | |
| 2x2x1/2 | 48.26 | 60.45 | 60.45 | 63.50 | |
| 2x2x2 | 60.45 | 60.45 | 63.50 | 63.50 | |
| 2x2x11/4 | 42.16 | 60.45 | 57.15 | 63.50 | |
| 2x2x3/4 | 26.67 | 60.45 | 44.45 | 63.50 | |
| 2x2x1 | 33.53 | 60.45 | 50.80 | 63.50 | |
| 2x2x21/2 | 73.15 | 73.15 | 76.20 | 72.20 | |
| NP | OD | Inconel 625 Reducer Nominal Dimensions | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Sch 5S | Sch 10S | Sch 40S | Sch 80S | ||||||
| Thickness | ID | Thickness | ID | Thickness | ID | Thickness | ID | ||
| 3/4" | 26.67 | 1.65 | 23.37 | 2.11 | 22.45 | 2.87 | 20.93 | 3.91 | 18.85 |
| 1/2" | 21.34 | 1.65 | 18.04 | 2.11 | 17.12 | 2.77 | 15.80 | 3.73 | 13.88 |
| 1" | 33.53 | 1.65 | 30.23 | 2.77 | 27.99 | 3.38 | 26.77 | 4.55 | 24.43 |
| 11/2" | 48.26 | 1.65 | 44.96 | 2.77 | 42.72 | 3.68 | 40.90 | 5.08 | 38.10 |
| 11/4" | 42.16 | 1.65 | 38.86 | 2.77 | 36.62 | 3.56 | 35.04 | 4.85 | 32.46 |
| 2" | 60.45 | 1.65 | 57.15 | 2.77 | 54.91 | 3.91 | 52.63 | 5.54 | 49.73 |
| 3" | 88.90 | 2.11 | 84.68 | 3.05 | 114.30 | 5.49 | 77.92 | 7.62 | 73.66 |
| 21/2" | 73.15 | 2.11 | 68.93 | 3.05 | 67.05 | 5.16 | 62.83 | 7.01 | 59.13 |
| 31/2" | 101.60 | 2.11 | 97.38 | 3.05 | 133.35 | 5.74 | 90.12 | 8.08 | 85.14 |
| 5" | 141.22 | 2.77 | 135.68 | 3.05 | 190.50 | 6.55 | 128.12 | 9.53 | 122.16 |
| 4" | 114.30 | 2.11 | 110.08 | 3.05 | 152.40 | 6.02 | 102.26 | 8.56 | 97.18 |
| 6" | 168.15 | 2.77 | 162.61 | 3.40 | 228.60 | 7.11 | 153.93 | 10.97 | 146.21 |
| 12" | 323.85 | 3.96 | 315.93 | 4.19 | 457.20 | 9.53 | 304.79 | 12.70 | 298.45 |
| 24" | 609.60 | 5.54 | 598.52 | 6.35 | 914.40 | 9.53 | 590.54 | 12.70 | 584.20 |
| 8" | 218.95 | 2.77 | 213.41 | 3.40 | 304.80 | 8.18 | 202.59 | 12.70 | 193.55 |
| 14" | 355.60 | 3.96 | 347.68 | 4.57 | 533.40 | 9.53 | 336.54 | 12.70 | 330.20 |
| 10" | 273.05 | 3.40 | 266.65 | 3.76 | 381.00 | 9.27 | 254.51 | 12.70 | 247.65 |
| 16" | 406.40 | 4.19 | 398.02 | 4.78 | 609.60 | 9.53 | 387.34 | 12.70 | 381.00 |
| 20" | 508.00 | 4.78 | 498.44 | 5.54 | 762.00 | 9.53 | 488.94 | 12.70 | 482.60 |
| 18" | 457.20 | 4.19 | 448.82 | 4.78 | 685.80 | 9.53 | 438.12 | 12.70 | 431.80 |
| 22" | 558.80 | 4.78 | 549.24 | 5.54 | 838.20 | 9.53 | 539.74 | 12.70 | 533.40 |
| 30" | 762.00 | 6.35 | 749.30 | 7.92 | 746.16 | – | – | – | – |