Incoloy 825 Filler Wire

Filler wire made of Incoloy 825 can join Incoloy 825 products.The material is known for its excellent corrosion resistance in corrosive environments like acids, alkalis and oxidizing media.

The Incoloy 825 filler wire is designated as ERNiFeCr 1 or ERNiFeCrMo 1, according to the AWS classification system.These filler wires are composed of ni, fe, cr and sometimes mo to match the composition and properties of Incoloy 825.

We are proud to announce that we are India's genuine supplier of alloy 825 welding wire

ERNiFeCr-3 or ERNiFeCr-1 welding electrode is commonly used for Inconel 825 welding.ERNiCrMo 3 contains nickel, chromium, molybdenum, and small amounts of iron and niobium.It is often preferred for applications requiring higher resistance to pitting and crevice corrosion.ERNiFeCr 1 contains nickel, iron, chromium, and small amounts of molybdenum and copper.Both are suitable for various welding processes to produce strong and corrosion-resistant welds.

Most trusted stockist of UNS N08825 tig wire and nickel alloy 825 filler rod in Mumbai at affordable costs according to AWS A5.14

The consumption of filler wire in welding can be estimated using the following formula:

Filler Wire Consumption = Weight of Weld Metal Required / Deposition Efficiency

The weight of the weld metal required depends on factors like the joint design, weld size & length.The deposition efficiency represents the percentage of WNR 2.4858 welding wire that is effectively deposited in the weld joint.

For use in chemical processing, we carry a ready supply of WNR 2.4858 welding rods with diameters ranging from 1.6 to 6.4 mm and lengths up to 1000 mm.

We carry stock of Inconel alloy 825 tig rod and can supply it in custom sizes for the cheapest price.Learn more about the different variants that are readily accessible.

Looking for ERNiFeCr-1 welding electrode in a unique size?there is no need to worry, you may now purchase nickel 825 filler metal online at dealer prices, see its properties

• More filler metal is added per unit of time which results in an increased deposition rate.This can be advantageous when trying to complete welding tasks more quickly.
• More current is needed to maintain the desired arc length.This leads to an increased heat input into the weld, which can affect the overall heat-affected zone and weld penetration.So, carefully control the heat input to prevent issues such as overheating or distortion.
• It can result in reduced weld penetration of UNS N08825 tig wire.This can impact the strength and integrity of the weld joint.
• If the tig wire feed speed is increased too much without adequate heat input, there is a risk of incomplete fusion.It results in a weak or unreliable weld joint.
• It requires skilled control and technique to ensure proper weld bead formation and fusion.

• Store the alloy 825 filler metal in a clean and dry environment to prevent moisture absorption, which can lead to weld defects.
• Handle the filler metal with clean gloves or tools to avoid contamination from oils, grease or other substances that can impact the weld quality.
• Thoroughly clean the base metal surface before welding to remove any contaminants, oxides or surface coatings impairing the weld quality.
• Follow the recommended welding parameters provided by the filler metal manufacturer.
• Use the appropriate shielding gas to protect the weld pool and prevent contamination.
• Depending on the specific welding application and requirements, post-weld heat treatment may be necessary.It helps to relieve residual stresses and enhance the properties of the nickel 825 welding rods welded joint.
• Weld in a well-ventilated area to control welding fumes, which may contain hazardous elements and gases

• Verify that the TIG rods come with a mill test certificate (MTC).
• Check the diameter and length of the nickel alloy 825 tig rods to ensure they match the specified dimensions and tolerances.
• Inspect the surface of the rods for any defects.
• Ensure that the TIG welding rods are properly packaged to protect them from moisture, dirt and physical damage during storage and transportation.
• Ensure the manufacturer or supplier.of the tig rods are reputed and reliable like Regent Steel & Engineering Co.
• Verify that the ERNiFeCr-1 TIG welding rods comply with relevant industry standards.

• GMAW
• GTAW
• SMAW

tensile strength and yield strength

Keep in low-humidity and dry conditions

one or two years

around 1725°F