Incoloy 800 Round Bar

Efficient cutting of round bars requires appropriate tools and methods.This will help to overcome the high strength and work hardening characteristics of inconel 800 round bar.

• Use high speed steel cutting tools specifically designed for machining nickel alloys.Tools with sharp cutting edges are essential for efficient material removal.
• Apply suitable lubricants during cutting operations to reduce heat buildup, extend tool life and prevent work hardening.
• Optimize the cutting speed and feed rate parameters to balance material removal rate & tool life.
• Ensure a rigid and stable machining setup to minimize vibration on alloy 800 round bar.
• Use proper cutting techniques to maintain a smooth operation and avoid excessive heat generation.
• Consider any required post cutting treatments like annealing.This is to restore the incoloy 800 round bar material properties and reduce residual stresses.

Most prominent alloy 800 rod supplier in India as per ASTM B408 at lowest price

• The Inconel alloy 800 rods should be handled with care to prevent damage or deformation.
• The installation surface must be clean, free from contaminants and properly prepared.
• Select an appropriate fastening method that suits the specific application and load requirements.
• The Inconel 800 material must be compatible with other materials in the installation system.
• Allow adequate clearance to accommodate thermal expansion and prevent undue stress on the installation.
• Consider the environmental conditions in which the bar will be installed.
• The installation must adhere to relevant industry standards, codes and regulations.

Due to our extensive experience, we maintain an inventory of ASTM B408 UNS N08800 hex bar in Mumbai at the lowest possible price.

• ASTM B408 UNS N08800 hex bar has a high work hardening rate.It becomes harder and more resistant to further machining when cutting forces are applied.
• The hexagonal shaped UNS N08800 annealed bar material exhibits high strength, thus, increased cutting forces & stresses on cutting tools.
• The alloy composition of UNS N08800 contributes to its unique properties.This makes it more difficult to machine compared to standard steel.

Stockist of nickel alloy 800 flat bar used in the chemical and power generation industries, with lengths ranging from 0.5 to 6.0 metres and a diameter of 3 to 600 millimeters.

Only the highest quality ASME SB408 WNR 1.4876 square and rectangular bar is provided by us and we provide it in a variety of finishes including black, bright and polished.

Buy cut-to-size alloy 800 bright and annealed bar online to save money right away.You can also view its properties here.

• Passivation involves the removal of iron or other contaminants from the surface of the alloy 800 bright bar.It helps to improve corrosion resistance and promote the formation of a protective oxide layer.
• Electroplating can be used to deposit a layer of a different metal or alloy onto the surface of the DIN 1.4876 rounds.This can provide added corrosion resistance, wear resistance or aesthetic appeal.
• Different types of coatings can be applied to the ASME SB408 nickel 800 rectangular bar surface.It provides additional protection against corrosion, oxidation, abrasion or chemical attack.
• Polishing involves the removal of surface imperfections to achieve a smooth, mirror-like finish on the Inconel 800 bar stock.

Hot forming involves heating the WNR 1.4876 square bar to elevated temperatures to increase its malleability.They can get easily deformed and shaped like bends, forges, or extrusions.Incoloy 800 hot rolled bars can have complex shapes and tight radii.They require careful control of temperature and cooling rates to prevent excessive grain growth and maintain desired mechanical properties.

Cold forming is performed at room temperature without heating.It involves plastic deformation through processes like bending, rolling or drawing.Inconel alloy 800 cold drawn bars have increased strength and hardness but may have residual stresses.Annealing can help in such situations.

• The nickel alloy 800 flat bar exhibit excellent resistance to oxidation, carburization, and nitridation at elevated temperatures.
• They offer exceptional resistance to various corrosive environments.
• The bars possess a combination of high strength, excellent creep resistance and good ductility.
• They show good weldability, allowing for ease of fabrication and joining.

38.9 microhm-in

184 HB

2.5 times the material thickness when transverse bending

oil and gas recovery,  pollution control, pickling operations

4.3 x 10-6 in/in/°F (7.7 µm/m/°C)