What is the operating temperature range for Hastelloy C276 pipe fittings?
Alloy C-276 can operate in oxidizing conditions up to 1038 °C.However, they might not perform well in strongly oxidizing environments like hot concentrated nitric acid due to insufficient chromium content.
The hastelloy c276 pipe fittings can be used in high temperature conditions as they have a higher melting range of 1325-1370 °C.The material is able to retain its strength and mechanical properties in high temperature conditions.
Table of content
- Hastelloy c276 pipe fittings specification
- What are different types of hastelloy c276 fittings ?
- Hastelloy C276 buttweld fittings chemical properties
- Alloy c276 elbow mechanical properties
- UNS N10276 tee equivalent
- ASME SB366 Nickel alloy c276 elbow weight chart
- Dimensions of Hastelloy alloy c276 fittings
We are one of India's largest and best-quality hastelloy C276 buttweld fittings manufacturer, review factors should consider when choosing a manufacturer
What factors should I consider when choosing a manufacturer of Hastelloy c276 fittings?
- The hastelloy c276 fittings manufacturer should maintain quality and provide you with relevant certifications.They must be compliant with the relevant industry standards.
- Choose an experienced manufacturer who has a good reputation in the industry, like Regent Steel & Engineering Co.
- They should offer customized hastelloy c276 pipe cross and other fittings as per specific application requirements.
- Assess the manufacturer's inventory and their delivery process should be streamlined to reduce the lead time.
- The manufacturers must offer ASME SB366 nickel c276 pipe bends at competitive rates and maintain cost transparency throughout the process.
Why spend more when alloy c276 elbow and tee is available here in the precise size?know What should I do if the product don't meet the necessary criteria ?
Hastelloy c276 buttweld fittings
Alloy c276 elbow
ASTM B366 UNS n10276 tee
What should I do if the alloy c276 elbow don't meet the necessary criteria?
- Document the detailed issue associated with alloy c276 elbow and describe why it does not meet the necessary criteria.
- Contact the manufacturer and provide them with the documented evidence.Also, convey your expectations and the criteria that the elbows must meet.
- Request a refund or replacement, as necessary.You should work with the elbow supplier to address any quality concerns.
- If they are unable to meet your requirements, contact another reputed C276 elbow supplier.
- Before taking delivery, conduct thorough inspections and get test reports to ensure compliance with future orders.
As supplier and stockist we offer ASTM B366 hastelloy c276 fittings in sizes ranging from 1/2′′ to 10′′ (seamless) and 1/2′′ to 48′′ (welded) for Oil & Gas , see specification chart
| Thickness | Size | Standard |
|---|---|---|
| Sch 10 to Sch XXS | Seamless: 1/2 to 10" Welded: 1/2 to 48" |
ASME/ ANSI B16.9, ASME B16.28 |
| Process | Radius | Type |
| Seamless/ Welded/ Fabricated | 1D to 10D or custom | Elbow, Tee, Reducer, Cap, Stub End |
| Specification | Surface | Application |
| ASTM B366 | ASME SB366 | Sand rolling, sand blasting | Flue gas desulfurization systems. |
If you need any assistance with ASTM SB366 UNS N10276 reducer and stub end requirements to complete your project in Mumbai, please contact us, check other types here
Nickel alloy c276 reducer
- 2D, 1D
- 5D, 3D, 6D
- 10D, 8D
DIN 2.4819 stub end
- Seamless: 1/2 to 10 inch
- Welded: 1/2 to 48 inch
- ASTM B366| ASME SB366
Hastelloy alloy c276 pipe bend
- MSS-SP-43
- ASME B16.28
- ASME/ ANSI B16.9
we provide DIN 2.4819 seamless and welded fittings as per ANSI/ASME B16.9 with value-added services together at a competitive price , learn more about technical properties
| Grade | Mo | C | Mn | Si | Co | P | S | Fe | Ni | Cr |
|---|---|---|---|---|---|---|---|---|---|---|
| Hastelloy c276 | 15.00 – 17.00 | 0.010 max | 1.00 max | 0.08 max | 2.50 max | 0.04 max | 0.03 max | 4.00 – 7.00 | 50.99 min* | 14.50 – 16.50 |
| Material | Hardness Rb | Yield Strength (Min) | Elongation % | C276 filler wire ultimate tensile (min) | ||
|---|---|---|---|---|---|---|
| Mpa | Ksi | Mpa | Ksi | |||
| Hastelloy c276 | 89 | 347 | 50.3 | 67 | 741 | 107.4 |
| Hastelloy c276 | 86 | 376 | 54.6 | 60 | 796 | 115.5 |
| STANDARD | UNS | WERKSTOFF NR. | JIS | EN | GOST | OR |
|---|---|---|---|---|---|---|
| Hastelloy c276 | N10276 | 2.4819 | NW 0276 | NiMo16Cr15W | ХН65МВУ | ЭП760 |
How can I make sure the Hastelloy C276 buttweld fittings are put properly?
- To ensure the hastelloy C276 buttweld fittings are put properly, you should select qualified and experienced professionals.
- Review the guidelines set by the manufacturer with reference to the installation process.
- Inspect the fittings prior to the installation to ensure there are no defects.
- Use the correct welding technique and filler material for hastelloy alloy c276 stub end and make sure to control the heat input.
- Once the welding is done, conduct a thorough visual inspection to check for signs of defects or damages.
How long does it take to get UNS N10276 tee?
The lead time for ASTM B366 UNS N10276 tee can vary with the supplier, product specifications and quantity ordered.Customized and bulk orders may take longer.You can get the delivery timelines when you contact Regent Steel & Engineering Co.
We will openly communicate with you about the deadlines and ensure the order is fulfilled on time.In case of any unforeseen delays, like shipping or production issues, we will let you know about that beforehand.
What are some typical uses for nickel alloy c276 reducer?
The nickel alloy c276 concentric reducer allows for a change in the sizes of the pipes to meet flow requirements.C276 is known for its corrosion resistance, durability and reliability.
Hence, the DIN 2.4819 eccentric reducer is used for various applications in industries like chemical processing, petrochemicals, waste treatment, power generation, etc.
| APPROXIMATES WEIGHTS | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nominal Pipe Size | 90°LR ELBOW | 45°LR ELBOW | 90°SR ELBOW | |||||||||
| 80S | 10S | 5S | 40S | 80S | 10S | 5S | 40S | 80S | 10S | 5S | 40S | |
| 3/4 | 0.110 | 0.060 | 0.062 | 0.075 | 0.090 | 0.030 | 0.031 | 0.037 | – | – | – | – |
| 1/2 | 0.110 | 0.060 | 0.049 | 0.075 | 0.090 | 0.030 | 0.024 | 0.038 | – | – | – | – |
| 1 | 0.230 | 0.140 | 0.078 | 0.160 | 0.140 | 0.100 | 0.039 | 0.120 | 0.180 | 0.094 | 0.077 | 0.118 |
| 11/2 | 0.500 | 0.280 | 0.170 | 0.350 | 0.310 | 0.180 | 0.085 | 0.200 | 0.340 | 0.189 | 0.114 | 0.245 |
| 12 | 72.00 | 25.90 | 22.30 | 56.20 | 38.00 | 12.50 | 11.10 | 28.10 | 47.17 | 16.70 | 14.80 | 37.50 |
| 11/4 | 0.400 | 0.240 | 0.125 | 0.260 | 0.230 | 0.140 | 0.063 | 0.170 | 0.280 | 0.152 | 0.101 | 0.204 |
| 2 | 1.000 | 0.460 | 0.286 | 0.660 | 0.540 | 0.310 | 0.143 | 0.400 | 0.680 | 0.318 | 0.191 | 0.434 |
| 3 | 3.000 | 1.200 | 0.810 | 2.150 | 1.600 | 0.650 | 0.405 | 1.100 | 1.900 | 0.761 | 0.540 | 1.360 |
| 31/2 | 3.800 | 1.530 | 1.080 | 2.820 | 2.000 | 0.760 | 0.540 | 1.410 | 2.700 | 1.020 | 0.719 | 1.880 |
| 4 | 6.100 | 2.000 | 1.390 | 4.000 | 2.800 | 1.050 | 0.696 | 1.950 | 3.800 | 1.310 | 0.928 | 2.560 |
| 21/2 | 1.800 | 0.800 | 0.576 | 1.300 | 0.960 | 0.450 | 0.288 | 0.700 | 1.300 | 0.541 | 0.383 | 0.909 |
| 5 | 10.00 | 3.420 | 2.830 | 6.480 | 4.800 | 1.710 | 1.420 | 3.240 | 6.300 | 2.280 | 1.890 | 4.320 |
| 8 | 32.00 | 10.00 | 7.060 | 20.10 | 15.80 | 5.010 | 3.530 | 10.10 | 21.55 | 6.680 | 4.710 | 13.40 |
| 6 | 15.80 | 5.250 | 4.030 | 9.940 | 7.900 | 2.430 | 2.010 | 4.970 | 10.40 | 3.240 | 2.680 | 6.630 |
| 10 | 48.00 | 15.50 | 13.20 | 35.40 | 23.90 | 7.770 | 6.620 | 17.70 | 31.75 | 10.40 | 8.830 | 23.60 |
| NOMINAL PIPE SIZE | ALL FITTINGS | ELBOWS AND TEES | 180 DEG RETURN BENDS | ALL FITTINGS | REDUCERS | 180 DEG RETURN BENDS | CAPS |
|---|---|---|---|---|---|---|---|
| NPS | OD at Bevel (1), (2) | Centre -to- End Dimension A, B, C, M | Alignment of Ends U | ID at End (1), (3), (4) |
Overall Length H | Centre-to- Centre O | Overall Length E |
| 3 to 3 ½ | 0.006 | 0.006 | 0.003 | 0.006 | 0.006 | 0.025 | 0.012 |
| ½ to 2½ | 0.006 -0.003 |
0.006 | 0.003 | 0.003 | 0.006 | 0.025 | 0.012 |
| 26 to 30 | 0.025 -0.019 |
0.012 | … | 0.019 | 0.019 | … | 0.038 |
| 5 to 8 | 0.009 -0.006 |
0.006 | 0.003 | 0.006 | 0.006 | 0.025 | 0.025 |
| 4 | 0.006 | 0.006 | 0.003 | 0.006 | 0.006 | 0.025 | 0.012 |
| 20 to 24 | 0.025 -0.019 |
0.009 | 0.006 | 0.019 | 0.009 | 0.038 | 0.025 |
| 10 to 18 | 0.016 -0.012 |
0.009 | 0.006 | 0.012 | 0.009 | 0.038 | 0.025 |
| 32 to 48 | 0.025 -0.019 |
0.019 | … | 0.019 | 0.019 | … |