The pipe fittings made from Hastelloy C22 are made from Ni-Cr-Mo alloy, showing good corrosion resistance.The Hastelloy c22 pipe fittings can connect and secure pipes, to ensure leakage free and reliable fluid or gas flows.Hastelloy C22 material shows exceptional resistance to different corrosive environments like acids, chlorides and oxidizing agents.
Welding, threading or using compression fittings can be used to secure Hastelloy c22 fittings.Welding helps permanently join the fittings to the pipes using heat while threading creates a screwed connection.Compression fittings have a compression ring to tighten and seal the Hastelloy c22 buttweld fittings onto the tube.The specific method used for fastening depends on both application & system requirements.
- Hastelloy c22 pipe fittings specification
- Most selling types of alloy c22 buttweld fittings
- ASTM B366 UNS N06022 tee equivalent
- Nickel alloy c22 elbow mechanical properties
- DIN 2.4602 reducer chemical properties
- Hastelloy alloy c22 elbow manufacturing process
- WP grades classes for WNR 2.4602 equal tee
- Dimensions of Hastelloy alloy c22 fittings
- Schedule chart of alloy c22 seamless fittings
- Hastelloy c22 fittings pressure rating
- Physical properties of ASME SB366 nickel c22 pipe bend
We are one of India's largest and highest-quality manufacturer of alloy c22 elbow
The difference between alloy C22 high and low pressure fittings is in their design.They are made to handle different pressure levels within a piping system.High pressure nickel alloy c22 reducing tee can withstand and contain fluids or gases under high pressure conditions.They have thicker walls, reinforced structures and reliable sealing mechanisms to ensure efficient performance in demanding applications.Low pressure nickel alloy c22 concentric reducer has lighter construction, thinner walls and simpler sealing mechanisms suitable for less demanding environments.
When ASTM B366 UNS N06022 reducer and tee is available here in the exact size and many types, why spend more?now obtain quote
Alloy c22 elbow
UNS N06022 tee
DIN 2.4602 reducer
To determine the proper size of WNR 2.4602 equal tee, several factors within your piping system are considered:
- Determine the nominal pipe size (NPS) by measuring the outer diameter of the pipe or referring to the manufacturer's specifications.
- Select the corresponding alloy c22 seamless fittings size.Ensure compatibility between the fitting size and the pipe size for a proper connection.
- Consider specific application requirements like flow rate & pressure which might influence the selection of the size of the ASME SB366 nickel c22 pipe bend.
As a supplier and stockist, we provide Hastelloy c22 buttweld fittings in Mumbai in sizes ranging from 1/2′′ to 48′′ (welded) and 1/2′′ to 10′′ (seamless) , see complete specification
| NPS | Hastelloy c22 fittings Schedule | Standard |
|---|---|---|
| ½ to 48 inch | Sch 5 to XXS | ASME B16.9 |
| Hastelloy c22 fittings Specification | Form | Hastelloy c22 fittings Surface |
| ASTM B366 | Elbow, Tee, Reducer, Stub End, Pipe Cap | Pickled, Polished |
Please get in touch with us if you want any help for DIN 2.4602 seamless fittings, including pipe bend, stub end, caps, and cross required to finish your project.
Nickel alloy c22 stub end
- ANSI/ASME B16.28
- MSS-SP-43
- ANSI/ASME B16.9
ASTM B366 Hastelloy c22 pipe cap
- Radius 2D, 1D
- 5D, 3D, 6D,
- 10D, 8D
WNR 2.4602 pipe cross
- Ultrasonic flaw detector
- Direct-reading Spectrograph
- Magnetic particle detector
Together with value-added services, we provide ASME SB366 nickel alloy c22 reducing/equal tee, concentric/eccentric reducer etc.learn more about its technical properties
| STANDARD | UNS | EN | JIS | GOST | WERKSTOFF NR. | OR |
|---|---|---|---|---|---|---|
| Hastelloy c22 fittings | N06022 | NiCr21Mo14W | NW 6022 | – | 2.4602 | – |
| Element | Tensile Strength | Melting Point | Yield Strength (0.2%Offset) | Density | Elongation |
|---|---|---|---|---|---|
| Hastelloy c22 fittings | Psi – 1,00,000 , MPa – 690 | 1399 °C (2550 °F) | Psi – 45000 , MPa – 310 | 8.69 g/cm3 | 45 % |
| Grade | Mo | P | Mn | C | Si | S | Co | Ni | Cr | Fe |
|---|---|---|---|---|---|---|---|---|---|---|
| Hastelloy c22 fittings | 12.50 – 14.50 | 0.02 max | 0.50 max | 0.010 max | 0.08 max | 0.02 max | 2.50 max | 50.015 min* | 20.00 – 22.50 | 2.00 – 6.00 |
| Construction | Hastelloy c22 fittings Class | Non-destructive Examination |
|---|---|---|
| Welded | WU | Ultrasonic |
| Welded | W | Radiography or Ultrasonic |
| Seamless | S | None |
| Welded | WX | Radiography |
| Hastelloy c22 fittings | Nominal Pipe Size | All fittings | All fittings | 180° Return Bends | 180° Return Bends | 180 Deg Return Bends | Reducers | Elbows/ Tees | Caps |
|---|---|---|---|---|---|---|---|---|---|
| O.D.at Bevel (1), (2) | NPS | Wall Thickness (3) | I.D.at End (1), (3), (4) |
Back-to-Face K | Centre-to-Centre O | Ends U Alignment | Overall Length H | Dimension A,B,C,M Centre-to-End | Overall Length E |
| 0.06 | 3 to 3 ½ | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.06 | 0.12 |
| 0.06 -0.03 |
½ to 2½ | Not less than 87.5% of nominal thickness | 0.03 | 0.25 | 0.25 | 0.03 | 0.06 | 0.06 | 0.12 |
| 0.06 | 4 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.06 | 0.12 |
| 0.16 -0.12 |
10 to 18 | Not less than 87.5% of nominal thickness | 0.12 | 0.25 | 0.38 | 0.06 | 0.09 | 0.09 | 0.25 |
| 0.09 -0.06 |
5 to 8 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.06 | 0.25 |
| 0.25 -0.19 |
26 to 30 | Not less than 87.5% of nominal thickness | 0.19 | … | … | … | 0.19 | 0.12 | 0.38 |
| 0.25 -0.19 |
20 to 24 | Not less than 87.5% of nominal thickness | 0.19 | 0.25 | 0.38 | 0.06 | 0.09 | 0.09 | 0.25 |
| 0.25 -0.19 |
32 to 48 | Not less than 87.5% of nominal thickness | 0.19 | … | … | … | 0.19 | 0.19 | 0.38 |
| DN | Hastelloy c22 fittings Schedule 40S | Schedule 10S | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 90° Elbow | 45° Elbow | End cap | Equal tee | Stub end type (B) | 90° Elbow | 45° Elbow | Stub end type (B) | Equal tee | End cap | |
| 20 | 0.08 | 0.04 | 0.07 | 0.17 | 0.11 | 0.07 | 0.03 | 0.09 | 0.13 | 0.05 |
| 15 | 0.08 | 0.04 | 0.04 | 0.10 | 0.08 | 0.06 | 0.03 | 0.07 | 0.09 | 0.03 |
| 25 | 0.15 | 0.11 | 0.10 | 0.29 | 0.17 | 0.14 | 0.08 | 0.16 | 0.28 | 0.08 |
| 40 | 0.40 | 0.23 | 0.20 | 0.86 | 0.31 | 0.30 | 0.17 | 0.25 | 0.68 | 0.11 |
| 32 | 0.26 | 0.17 | 0.18 | 0.59 | 0.25 | 0.23 | 0.11 | 0.22 | 0.49 | 0.10 |
| 50 | 0.70 | 0.40 | 0.23 | 1.28 | 0.61 | 0.50 | 0.25 | 0.43 | 0.85 | 0.13 |
| 80 | 2.20 | 1.08 | 0.42 | 3.31 | 1.13 | 1.25 | 0.63 | 0.72 | 1.77 | 0.25 |
| 65 | 1.40 | 0.77 | 0.27 | 2.19 | 0.80 | 0.85 | 0.48 | 0.57 | 1.41 | 0.19 |
| 100 | 4.47 | 1.47 | 1.14 | 5.27 | 1.87 | 2.10 | 1.08 | 1.09 | 3.46 | 0.68 |
| 150 | 10.89 | 5.44 | 3.23 | 10.99 | 3.57 | 5.45 | 2.72 | 2.15 | 8.03 | 1.42 |
| 125 | 6.80 | 2.84 | 2.13 | 9.63 | 2.79 | 3.65 | 1.82 | 1.47 | 5.44 | 1.11 |
| 200 | 21.54 | 10.77 | 5.19 | 20.91 | 6.07 | 10.20 | 5.33 | 3.22 | 15.65 | 2.38 |
| 300 | 59.42 | 29.71 | 15.00 | 62.14 | 14.29 | 25.80 | 13.62 | 8.16 | 39.46 | 7.50 |
| 250 | 38.56 | 19.27 | 9.00 | 35.38 | 10.07 | 18.15 | 9.75 | 5.13 | 26.76 | 4.45 |
| 400 | 99.79 | 45.81 | 21.00 | 99.79 | 20.41 | 47.63 | 23.81 | 12.70 | 58.97 | 10.67 |
| 350 | 79.38 | 35.15 | 16.00 | 79.31 | 17.14 | 36.29 | 18.37 | 10.88 | 48.53 | 8.17 |
| 500 | 162.38 | 74.84 | 34.00 | 162.39 | 29.94 | 99.80 | 49.90 | 21.77 | 103.42 | 17.00 |
| 450 | 129.73 | 59.40 | 26.00 | 129.73 | 27.21 | 59.87 | 29.94 | 17.23 | 79.65 | 13.00 |
| 600 | 225.89 | 105.23 | 52.00 | 225.90 | 38.55 | 140.61 | 70.31 | 27.21 | 155.58 | 26.00 |
| Ratings of Temperature | Hastelloy c22 fittings Class of Pressure | ||||
|---|---|---|---|---|---|
| 150 | 300 | ||||
| 1/4 - 1 Inches | 1 1/4 - 2 Inches | 2 1/2 - 3 Inches | |||
| (oC) | (oF) | ||||
| 93 | 200 | 265 | 1785 | 1350 | 910 |
| -29 to 66 | -20 to 150 | 300 | 2000 | 1500 | 1000 |
| 149 | 300 | 185 | 1360 | 1050 | 735 |
| 121 | 250 | 225 | 1575 | 1200 | 825 |
| 204 | 400 | - | 935 | 750 | 560 |
| 177 | 350 | 150 | 1150 | 900 | 650 |
| 260 | 500 | - | 510 | 450 | 385 |
| 232 | 450 | - | 725 | 600 | 475 |
| 288 | 550 | - | 300 | 300 | 300 |
| HASTELLOY C22 FITTINGS MELTING POINT (°C) | 1351 – 1387 |
| DENSITY (LB/IN 3) | 0.311 |
| HASTELLOY C22 FITTINGS DENSITY (G/CM 3) | 8.61 |
| MELTING POINT (°F) | 2464 – 2529 |
There are different types of Hastelloy alloy c22 fittings, like:
- Elbows can change the pipe flow direction
- ASTM B366 UNS N06022 tee helps to branch the pipe into two or more directions
- Reducers can connect pipes of different diameters
- A coupling can join two pipes of the same size
There are several other fitting types used in the piping system.They are chosen as per the specific application and system requirements.
When purchasing an alloy C22 elbow, several factors are to be considered:
- The material should be genuine which will ensure its corrosion resistance properties.
- Determine the appropriate elbow size by considering the OD and the desired angle of the pipe bend.
- The wall thickness and pressure rating of the elbow should be on par with the system requirements.
- Evaluate factors like temperature, fluid composition and environmental conditions to ensure compatibility with the application.
- Always source the products from reputable manufacturers like Regent Steel & Engineering Co.They adhere to the industry standards guaranteeing the quality and reliability of the elbow.
DIN 2.4602 pipe fittings are measured using standard dimensions & specifications.The measurements are based on key parameters like OD and wall thickness, which determine the nominal pipe size.The NPS determines the right Hastelloy c22 pipe cross size for proper compatibility and connection.All the dimensions are specified according to industry standards & specifications.
excellent corrosion resistance in dry/wet HCl gases
510 to 1038°C (950 to 1900°F)
high temperature application
C-22 has better overall corrosion resistance compared to C-276
excellent weldability